Spanning-Tree Interface Attributes; Shutdown Spanning-Tree - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

spanning-tree interface attributes

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

shutdown spanning-tree

Command
Command Modes
User Guidelines
28-6
To set detailed spanning attrebutes to ports.
spanning-tree {cost <value(0-200000000)> | disable | link-type
{point-to-point
<value(0-240)>}
no spanning-tree {cost | disable | link-type | portfast |
port-priority}
cost
value(0-200000000)
disable
link-type
point-to-point
link-type shared
portfast
port-priority
value(0-240)
Cost -
Portfast -
Link-type -
Port-priority -
Interface Configuration Mode
1. A portfast port will change to forwarding quickly during STP convergence, so
that it can speed up the STP convergence.
2. Using no form to reset the port attributes to default.
switch(config-if)# spanning-tree cost 100
Version History
1.00.001 This command was introduced
To shutdown the spanning tree function.
shutdown spanning-tree
Global Configuration Mode
MSTP and RSTP are exclusive to each other, so that spanning tree function must
be shutdown when changing the STP operation mode.
| shared} |
Specify the pathcost of this port.
Disbles spanning tree on this port.
Specify the port link type is point to point.
Specify the port connects to a LAN which has
another bridge.
Specify the port connects to host
Speficy the port STP priority.
2000000
Not in portfast
Shared
128
portfast | port-priority