Conventions - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Configuration
Mode
Config-vlan Mode
MSTP
Configuration
Mode
MAC Access List
Configuration
Mode
Standard IP Access
List Configuration
Mode
Extended IP
Access List
Configuration
Mode
Class-map
Configuration
Mode
Policy-map
Configuration
Mode
Policy-map Class
Configuration
Mode

Conventions

11-21
interfaces.
The VLAN Configuration Mode is used to configure the commands for VLAN
interfaces.
The MSTP Configuration Mode is used to configure multiple spanning tree
specific commands.
The MAC Access List Configuration Mode is used to configure L2 access rules
including content such as MAC address, VLAN, or specific Ether type.
The Standard IP Access List Configuration Mode is used to configure L3 access
rules with specific source/destination IP address.
The Standard IP Access List Configuration Mode is used to configure L3/4
access rules with specific IP address, protocol type or port number.
The Class-map Configuration Mode is used to configure class rules and access
lists mapping.
The Policy-map Configuration Mode is used to configure policy mapping for class
rules.
The Policy-map Class Configuration Mode is used to configure the actions of
policies.
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
- Commands and keywords are in bold text.
- Arguments for which you supply values are in italic.
- Square brackets ([ ]) means optional elements.
- Braces ({}) group required choices, and vertical bars ( | ) separate the alternative
elements.
- Braces and vertical bars within square brackets ([{ | }]) mean a required choice
within an optional element.