TRENDnet TL2-G244 User Manual page 250

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Command Modes
Example
Command History
35-7
ip
ospf
pim
protocol-type
(1-255)
any
host
src-ip-address
src-ip-address
mask
any
host
dest-ip-address
dest-ip-address
mask
tos value (0-7)
dscp value
(0-63)
tcp
udp
anyport
src-port
(1-65535)
x8000 ~ xFFFF
dest-port
(1-65535)
x8000 ~ xFFFF
ack
ack-not
rst
rst-not
Extended IP Access List Configuration Mode
switch(config-ext-nacl)# deny ip any any tos 7
Version History
1.00.001 This command was introduced
Matching all IP packets.
Matching all OSPF packets.
Matching all PIM packets.
Matching packets with specific protocol type.
Matching packet with any source IP address.
Matching packet with a specific source IP address.
Matching packet with a range of source IP address. For
example 172.17.5.1 with mask 255.255.255.0 means
172.15.5.0~255.
Matching packet with any destination IP address.
Matching packet with a specific destination IP address.
Matching packet with a range of destination IP address.
For example 172.17.5.1 with mask 255.255.255.0 means
172.15.5.0~255.
Matching packets with specific ToS value.
Matching packets with specific DSCP type.
Matching all TCP packets.
Matching all UDP packets.
Matching packets with any L4 source port.
Matching packets with a specific L4 source port.
Matching packets with a specific L4 destination port.
Macthing packets with a TCP acknowledge flag
Macthing packets with a TCP acknowledge-not flag
Macthing packets with a TCP reset flag
Macthing packets with a TCP reset not flag