Show Mac Address Table; Show Mac-Address-Table Aging-Time - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
show mac-address-table
Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

show mac-address-table aging-time

33-4
To display the MAC address data learned or configured in MAC address table.
show mac-address-table
<aa:aa:aa:aa:aa:aa>]
<interface-id>}]
vlan vlan-range
address
aa:aa:aa:aa:aa:aa
interface
interface-type
interface-id
Privileged EXEC Mode
System will display all MAC addresses when executing the command without
given VLAN, address and interface parameters.
switch# show mac-address-table int fa 0/9
Vlan Mac Address
---- -----------
1 00:00:48:bf:f3:01
1 00:03:64:00:01:23
1 00:0d:60:cc:2f:fe
1 00:0d:60:fb:52:c6
1 00:0e:7b:a0:12:97
1 00:0f:3d:2a:f0:1f
1 00:0f:3d:a8:88:9b
1 00:0f:ea:f0:0e:1e
1 00:0f:ea:f0:22:4f
1 00:10:c6:d0:ff:4f
1 00:11:25:43:38:83
1 00:11:25:87:1d:30
1 00:11:2f:2a:4f:ee
1 00:11:2f:8a:73:59
1 00:11:95:10:b3:7b
1 00:12:28:00:08:00
1 00:13:46:da:92:e9
1 00:13:46:f1:1a:92
1 00:14:85:13:cc:c6
Total Mac Addresses displayed: 19
Version History
1.00.001 This command was introduced
To display the current setting of MAC table aging time.
[vlan
[{interface
To display MAC addresses belong to a specific VLAN
range.
Specify a specific MAC address to display.
To display MAC addresses under a specific port.
Interface-type including Fa (Fast Ethernet), Gi (Gigabit
Ethernet) or port-channel.
Interface-id is slot/port number or port channel ID.
Type Ports
---- -----
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
Learnt Fa0/9
<vlan-range>]
<interface-type>
[address