Snmp Trap Link-Status; Show Snmp - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command History

snmp trap link-status

Command
Default Settings
Command Modes
Example
Command History

show snmp

Command
Command Modes
17-10
Version History
1.00.001 This command was introduced
To enable sending link-status Trap message, and no form disables it
snmp trap link-status
no snmp trap link-status
Disabled
Interface Configuration Mode
switch(config-if)# snmp trap link-status
Version History
1.00.001 This command was introduced
To display the SNMP settings
show snmp
Privileged EXEC Mode