Snmp-Server Enable Traps Snmp Authentication - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Default Settings
Command Modes
Example
Command History

snmp-server enable traps snmp authentication

Command
Default Settings
Command Modes
Example
Command History
17-8
Excludes the object from the list that the SNMP administrator
excluded
can access
Store in volatile memory
volatile
Store in nonvolatile memory
nonvolatile
View Name : iso
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
------------------------------
View Name : ReadWrite
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
------------------------------
View Name : restricted
Subtree OID : 1
Subtree Mask : 1
View Type : Included
Storage Type : Non-volatile
Global Configuration Mode
switch(config)# snmp view operv2readview 1.3.6.1 mask 1.1.1.1
included nonvolatile
Version History
1.00.001 This command was introduced
To enable the authentication trap messages for SNMP v1 and v2c, and the no
form disables it.
snmp-server enable traps snmp authentication
no snmp-server enable traps snmp authentication
Disabled
Global Configuration Mode
switch(config)# snmp-server enable traps snmp authentication
Version History
1.00.001 This command was introduced