Arp Timeout - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax
Description
Command Modes
User Guidelines
Example
Command History

arp timeout

Command
Syntax
Description
Default Settings
Command Modes
User Guidelines
Example
Command History
15-3
ip address
hardware address
Vlan
vlan-id(1-4094)
interface-type
interface-id
Linuxvlan
interface-name
Cpu0
Global Configuration Mode
The no form is to remove the entry.
switch(config)# arp 10.90.90.100 11:22:33:44:55 vlan 1
Version History
1.00.001 This command was introduced.
To set the ARP table timeout.
arp timeout <seconds (30-86400)>
no arp timeout
seconds (30-86400)
300
Global Configuration Mode
The no form is to reset to default value.
switch(config)# arp timeout 3600
Version History
1.00.001 This command was introduced.
IP address of the network node.
MAC address of the network node.
VLAN id
Interface type and id of the interface connects to the ARP
entry.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Interface name of Linux VLAN interface.
Out-of-band management interface.
ARP entry timeout period