Chapter 38 Rate Limiting Command; Rate Limiting Command List; Rate-Limit Egress; Rate-Limit Ingress - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

Rate Limiting Command List

rate-limit egress

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

rate-limit ingress

Command
Syntax Description
Default Settings
38-1
Rate Limiting Command

rate-limit egress

rate-limit ingress

show rate-limit
To enable and setup the egress packet rate limiting on a port.
rate-limit egress [<rate-value(64~1000000)>]
no rate-limit egress
Specify the traffic Kbit per second is allowed to be transmitted
rate-value
for an egress port..
(64~1000000)
Disable
Interface Configuration Mode
The no form is to disable the rate limiting on a port.
switch(config-if)# rate-limit egress 64
Version History
1.00.001 This command was introduced
To enable and setup the ingress packet rate limiting on a port.
rate-limit ingress [<rate-value (64~1000000)>]
no rate-limit ingress
Specify the traffic Kbit per second is allowed to be received
rate-value
for an ingress port.
(64~1000000)
Disable
Chapter 38