Set Ip Http; Ip Http Port; Show System Information - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

set ip http

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

ip http port

Command
Syntax
Description
Default Settings
Command Modes
User Guidelines
Example
Command History

show system information

12-7
To enable or disable HTTP server.
set ip http {enable | disable}
To enable the embedded HTTP server.
enable
To disable the embedded HTTP server.
disable
Enable
Global Configuration Mode
switch(config)#set ip http enable
Version History
1.00.001 This command was introduced.
To configure the TCP port for HTTP server connection.
ip http port <port-number(1-65535)>
no ip http port
port-number(1-65535)
80
Global Configuration Mode
The no form resets the HTTP port to default.
switch(config)#ip http port 8080
Version History
1.00.001 This command was introduced.
To display system information.
TCP port number.