TRENDnet TL2-G244 User Manual page 211

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
dot1x control-direction
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
31-4
ip-address
timeout 1-120
retransmit 1-254
key
secret-key-string
timeout – 3 seconds
retransmit – 3 times
Global Configuration Mode
When configure a RADIUS server without timeout and retransmit parameter,
system will apply the default values.
switch(config)# radius-server host 172.17.5.111 key trendnet
Version History
1.00.001 This command was introduced
To choose the authentication control direction on ports.
dot1x control-direction {in | both}
no dot1x control-direction
Specify the the authentication control is only for ingress
in
packets.
Specify the the authentication control is for both ingress and
both
egress packets.
both
Interface Configuration Mode
Using no form the reset the control direction to default.
switch(config-if)# dot1x control-direction in
Version History
1.00.001 This command was introduced
Specify the IP address of RADIUS server.
Specify the time period that a client waits for the
response from the RADIUS server before re-sending
the request.
The maximum number that a client re-sends the
request when there is no response from RADIUS
server.
The encryption key for the communication of RADIUS
server.