Ip Extended Acl Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Parameter
ACL Number
Action
Source IP Address
Subnet Mask
Destination IP Address
Subnet Mask
Port List (Incoming)
Click Add to create a new ACL rule, Reset to clear the value.
Parameter
Select
ACL Number
Action
Source IP Address
Subnet Mask
Destination IP Address
Subnet Mask
Port List (Incoming)
Click Apply to submit the changes to the ACL rule, Delete to delete it.

IP Extended ACL Configuration

This page is to create/configure a rule to IP Extended Access Control List.
7-3
Figure 68 – ACL > IP Standard ACL
Description
Specify the ACL ID of this rule. The possible ID of IP Standard ACL is 1-1000.
Specify the action for packet matched. Select Permit to process the packets,
Deny to discard them.
Matching packet with a specific source IP address.
Matching packet with a range of source IP address. For example 172.17.5.1
with mask 255.255.255.0 means 172.15.5.0~255.
Matching packet with a specific destination IP address.
Matching packet with a range of destination IP address. For example
172.17.5.1 with mask 255.255.255.0 means 172.15.5.0~255.
Specify the ports to apply this ACL rule.
Description
Select an ACL rule to apply the configuration changes.
Specify the ACL ID of this rule.
Specify the action for packet matched. Select Permit to process the packets,
Deny to discard them.
Matching packet with a specific source IP address.
Matching packet with a range of source IP address. For example 172.17.5.1
with mask 255.255.255.0 means 172.15.5.0~255.
Matching packet with a specific destination IP address.
Matching packet with a range of destination IP address. For example
172.17.5.1 with mask 255.255.255.0 means 172.15.5.0~255.
Specify the ports to apply this ACL rule.