Negotiation; Speed - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command Modes
User Guidelines
Example
Command History

negotiation

Command
Command Modes
User Guidelines
Example
Command History

speed

Command
Syntax Description
Default Settings
Command Modes
25-2
Global Configuration Mode
1. Using no form to disable the port mirroring function.
2. Destination port and source port have to be counfigured separately.
3. A port-channel can be mirrored, however, a port-channel port cannot.
switch(config)# monitor session 1 destination interface fa 0/1
switch(config)# monitor session 1 source interface fa 0/2 both
Version History
1.00.001 This command was introduced
To enable auto-negotiation function to ports.
negotiation
no negotiation
Interface Configuration Mode
The configured port speed, duplex mode, and flow control only take effect when
auto-negotiation disabled.
switch(config-if)# no megotiation
Version History
1.00.001 This command was introduced
To set the port speed.
speed { 10 | 100 | 1000 }
Port runs at 10Mbps.
10
Port runs at 100Mbps.
100
Port runs at 1000Mbps.
1000
The N-way result with link partner.
Interface Configuration Mode