802.1X Local Authentication Server Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Select
Port
Quiet Period (secs)
Transmit Period (secs)
Re-authentication
Period (secs)
Supplicant Timeout
(secs)
Server Timeout (secs)
Click Apply to submit the changes.
Click 1-12, 13-24 to configure 802.1X timer settings for corresponding ports.

802.1X Local Authentication Server Configuration

This page is to configure the 802.1X local user database.
Parameter
User Name
Password
Permission
Auth-TimeOut
Port List
Click Add to add a new user entry, Reset to clear the value.
Parameter
Select
User Name
Permission
Auth-TimeOut
Port List
Click Apply to submit the changes to existing user account, Delete to delete one.
6-20
Select a port to apply the configuration changes.
Port ID.
The period that Switch will not do anything after a failed authentication.
Possible value is 0-65535 seconds. Default is 60.
The period that Switch waits for a response to an EAP-request/identity frame
from the client before retransmitting the request. Possible values are 1-65535
seconds. Default is 30.
The period between re-authentication attempts. Possible value is 1-65535
seconds. Default is 3600.
The period that Switch waits for the re-transmission to the client. Possible
value is 1-65535 seconds. Default is 30.
The period that Switch waits for the re-transmission to the RADIUS server.
Possible value is 1-65535 seconds. Default is 30.
Figure 57 – Layer2 Management > 802.1X > Local AS
Description
Specify the user name of the new user entry.
Specify the password of the new user entry.
Specify if the new user is allowed to access the network.
Specify the authentication timeout for the new user.
Specify which port that the new user is allowed to access.
Description
Select an existing user entry to apply new settings.
The user ID.
Specify if the user is allowed to access the network.
Specify the authentication timeout for the user.
Specify which port that the user is allowed to access.