24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
ip igmp snooping clear counters
Command
Syntax Description
Command Modes
User Guidelines
Example
Command History
ip igmp snooping group-query-interval
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
ip igmp snooping mrouter
32-2
To clear the IGMP snooping. counters
ip igmp snooping clear counters [Vlan <vlanid (1-4094)>]
Specify the counters of which VLAN to clear.
Vlan
vlanid
(1-4094)
Global Configuration Mode
System will clear all IGMP counters when executing this command without a
VLAN parameter.
switch(config)# ip igmp snooping clear counters vlan 1
Version
History
1.00.001
This command was introduced
To set up the time interval to send the group specific query.
ip igmp snooping group-query-interval <(1-5) seconds>
no ip igmp snooping group-query-interval
Specify the time interval to send IGMP query.
(1-5) seconds
2 seconds
Global Configuration Mode
Using no form to reset the time interval to default.
switch(config)# ip igmp snooping group-query-interval 5
Version
History
1.00.001
This command was introduced
To configure static IGMP multicast router ports on a specific VLAN.