Show Ip Igmp Snooping Globals; Show Ip Igmp Snooping Groups - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command History

show ip igmp snooping globals

Command
Command Modes
Example
Command History

show ip igmp snooping groups

Command
Syntax Description
Command Modes
User Guidelines
32-10
Version History
1.00.001 This command was introduced
To display the current global settings of IGMP snooping function.
show ip igmp snooping globals
Privileged EXEC Mode
switch# sh ip igmp snooping globals
Snooping Configuration
-----------------------------
IGMP Snooping globally enabled
IGMP Snooping is operationally enabled
Transmit Query on Topology Change globally disabled
Multicast forwarding mode is MAC based
Proxy reporting globally disabled
Router port purge interval is 125 seconds
Port purge interval is 260 seconds
Report forward interval is 5 seconds
Group specific query interval is 1 seconds
Querier query interval is 125 seconds
Reports are forwarded on router ports
Group specific query retry count is 2
Version History
1.00.001 This command was introduced
To display the IGMP snooping group information
show ip igmp snooping groups [Vlan <vlan id> [Group <Address>]]
Vlan vlan id
Group Address
Privileged EXEC Mode
System will display all the IGMP group information snooped by the Switch when
executing the command without given VLAN and group address parameters.