Mdi; Show Flow-Control - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command History

mdi

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

show flow-control

Command
Syntax Description
Command Modes
Example
Command History
25-4
Version History
1.00.001 This command was introduced
To set MDI or MDIX mode for ports.
mdi { auto | mdi | mdix }
Port performs the auto MDI/MDIX function.
auto
Port fixed at MDI mode.
mdi
Port fixed at MDIX mode.
mdix
Auto
Interface Configuration Mode
switch(config-if)# mdi mdi
Version History
1.00.001 This command was introduced
To display the flow control settings and statistics of interfaces.
show flow-control [ interface <interface-type> <interface-id>]
interface
interface-type
interface-id
Privileged EXEC Mode
switch# show flow-control int fa 0/2
Port Tx FlowControl Rx FlowControl Tx Pause RxPause
---- -------------- --------------- -------- --------
Fa0/2 off
Version History
1.00.001 This command was introduced
Specify which interface to show flow-control settings.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
off 0 0