Debug Ssl - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Default Settings
Command Modes
Example
Command History

debug ssl

Command
Syntax Description
Default Settings
Command Modes
Example
Command History
19-2
SSL server is disabled.
Cipher Suite is RSA-DES-SHA1, RSA-3DES-SHA1, and
RSA-EXP1024-DES-SHA1
Global Configuration Mode
switch(config)# ip http secure ciphersuite rsa-null-md5
Version History
1.00.001 This command was introduced
To enable the debug messages of SSL. The no format will reset all settings.
debug ssl {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer]}
no debug ssl {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer]}
Enable or disable all categories of messages.
all
Shutdown messages.
shut
Management messages.
mgmt
Data Path messages.
data
Control panel messages.
ctrl
Packet Dump messages.
dump
All resource messages except for buffer.
resource
Failure messages.
failall
Buffer messages.
buffer
Disabled
Privileged EXEC Mode
switch# debug ssl all
Version History
1.00.001 This command was introduced