Chapter 26 Vlan Command; Vlan Command List; Vlan; Switchport Acceptable-Frame-Type - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

VLAN Command List

vlan

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

switchport acceptable-frame-type

Command
26-1

vlan

switchport acceptable-frame-type

switchport ingress-filter

switchport pvid

ports

debug vlan

show vlan

show vlan device info

show vlan port config
To create a VLAN or enter a VLAN interface configured.
vlan <vlan-id(1-4094)>
no vlan <vlan-id(1-4094)>
vlan-id(1-4094)
Global Configuration Mode
Using no form to delete a VLAN.
switch(config)# vlan 100
switch(config-vlan)#
Version History
1.00.001 This command was introduced
To configure the acceptable frame type of a port.
switchport acceptable-frame-type
untaggedAndPrioritytagged}
no switchport acceptable-frame-type
VLAN Command
Specify the VLAN ID to create or enter.
Chapter 26
{all | tagged |