Storm Control Settings; P Queue Mapping - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Ingress RateLimit
(0,64~1000000 Kbps)
Egress RateLimit
(0,64~1000000 Kbps)
Click Apply to submit the changes.
Click 1-12, 13-24 to configure rate limiting for corresponding ports.

Storm Control Settings

This page is to configure the storm control function of the device.
Parameter
System Control
Packet Type
Rate Limit

802.1p Queue Mapping

This page is to configure the 802.1p priority and queue mapping.
8-2
Specify the traffic Kbit per second is allowed to be transmitted for an ingress
port. 0 means no limit.
Specify the traffic Kbit per second is allowed to be transmitted for an egress
port. 0 means no limit.
Figure 73 – QoS > Storm Global Settings
Description
To activate or shutdown storm control function of the Switch. Select Enable to
activate link aggregation function, Disabled to shutdown it. Default is Start.
Specify which kind of packets to be controlled. The options are:
Broadcast only - Control broadcast packets only.
Multicast and Broadcast - Control both multicast and broadcast packets.
DLF and Multicast and Broadcast - Control Destination Lookup Failed
unicast, multicast and broadcast packets.
Specify the maximum packet rate is allowed per second.
Figure 74 – QoS > 802.1p