Ip Igmp Snooping Mrouter-Time-Out; Ip Igmp Snooping Port-Purge-Interval - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

ip igmp snooping mrouter-time-out

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

ip igmp snooping port-purge-interval

32-3
ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...>
no ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...>
interface-type
0/a-b, 0/c, ...
Config-vlan Mode
Using no form to delete a static IGMP multicast router port.
switch(config-vlan)# ip igmp snooping mrouter int fa 0/1
Version History
1.00.001 This command was introduced
To set the time-out period that an IGMP multicast router port hasn't received
IGMP router control packet, it will be deleted.
ip igmp snooping mrouter-time-out <(60 - 600) seconds>
no ip igmp snooping mrouter-time-out
(60-600) seconds
125 seconds
Global Configuration Mode
Using no form to reset the time out period to default.
switch(config)# ip igmp snooping mrouter-time-out 60
Version History
1.00.001 This command was introduced
To set the purge interval that an IGMP member port hasn't' received IGMP report
packet, it will be deleted.
Specify the type and ID of the static multicast router port.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Specify the time out period of IGMP multicast router
ports.