Rstp Port Status; La Basic Settings - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Select
Port
Port Role
Port Priority
RSTP Status
Path Cost
Protocol Migration
Admin Edge Port
Admin Point To Point
AutoEdge Detection
Restricted Role
Restricted TCN

RSTP Port Status

To display the current RSTP port status.
Click 1-12, 13-24 to display the statistics for corresponding ports.
LA

LA Basic Settings

This page is to configure the link aggregation basic settings.
6-14
Select a port to apply the changes.
Port ID.
Specify the current role of the port.
Specify the spanning tree port priority. Possible value is 0-240. Default is 128.
To enable or disable the RSTP on this port. Select Enable to enable RSTP on
this port, Disable to disable it. Default is enabled.
Specify the path cost of the port. Possible value is 0-200000000. Default
65535
To control if the port will migrate among MSTP, RSTP and STP automatically if
another switch runs different protocol. Select True to enable the protocol
migration function, False to disable it. Default is False.
Specify if this port is edge port or not. Select True to enable the portfast
function, False to disable it. Default is False.
Specify the link type of this port. ForceTrue means link type is point to point;
ForceFalse means it is shared; Auto means the decision will made
automatically. Default is Auto.
To enable or disable the auto edge detection of this port. Select True to
enable the auto edge function, False to disable it. Default True.
To enable or disable the root guard function to prevent the port becoming a
root port. Select True to enable the root guard function, False to disable it.
Default is False.
To enable the topology change guard function to prevent the topology change
caused by this port. Select True to enable the topology change guard
function, False to disable it. Default is False.
Figure 47 – Layer2 Management > RSTP > Port Status