Sntp Secondary-Ip; Sntp Timezone - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Syntax Description
Command Modes
Example
Command History

sntp secondary-ip

Command
Syntax Description
Command Modes
Example
Command History

sntp timezone

Command
Syntax Description
Command Modes
21-4
sntp primary-ip <ip-address>
Specify the IP address of the primary SNTP server.
ip-address
Global Configuration Mode
switch(config)# sntp primary-ip 172.17.5.254
Version History
1.00.001 This command was introduced
To set the secondary SNTP server IP address.
sntp secondary-ip <ip-address>
Specify the IP address of thesecondary SNTP server.
ip-address
Global Configuration Mode
switch(config)# sntp secondary-ip 172.17.5.253
Version History
1.00.001 This command was introduced
To determine the time zone used in order to adjust the system clock.
sntp timezone offset [-] <hour (0-13)> <minute (0-59)>
The adjustment for time zone relative to GMT.
offset
To subtract time to GMT.
-
Specify the number of hours different from GMT.
hour (0-13)
Specify the number of minutes different from GMT.
minute (0-59)
Global Configuration Mode