Show Mac-Address-Table Count; Show Mac-Address-Table Dynamic Multicast - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Command Modes
Example
Command History

show mac-address-table count

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

show mac-address-table dynamic multicast

Command
33-5
show mac-address-table aging-time
Privileged EXEC Mode
switch# show mac-address-table aging-time
Mac Address Aging Time: 300
Version History
1.00.001 This command was introduced
To display the statistics for each kind of MAC address in MAC address table.
show mac-address-table count [vlan <vlan-id(1-4094)>]
vlan
vlan-id(1-4094)
Privileged EXEC Mode
System will display all statistics when executing the command without a given
VLAN parameter.
switch# show mac-address-table count vlan 1
Mac Entries for Vlan 1:
--------------------------
Dynamic Unicast Address Count
Dynamic Multicast Address Count : 1
Static Unicast Address Count
Static Multicast Address Count
----------------------------------------
Version History
1.00.001 This command was introduced
To display the multicast MAC address dynamic learned in MAC address table.
show mac-address-table dynamic multicast [vlan <vlan-range>]
[address <aa:aa:aa:aa:aa:aa>] [{interface <interface-type>
<interface-id>}]
Specify information of which VLAN to display.
: 2
: 2
: 2