Common Fields And Buttons - Micromeritics TRISTAR II PLUS Operator's Manual

C F
OMMON IELDS AND
The fields and buttons in the following table are located in multiple windows throughout the
analyzer application and have the same description or function. Fields and button descriptions not
listed in this table are found in tables in their respective sections. All entry fields will accept
information when using a bar code reader.

Common Fields and Buttons

Selections
Add
Add Log Entry
Append
Autoscale
Axis Range
Bar Code (default field
label name)
Browse
Cancel
Clear
Close
Close All
Comments
Copies
Delete
Destination
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
B
UTTONS
Description
Adds an item to the list.
Use to enter information that will display in the sample log report that
cannot be recorded automatically through the application. Click the but-
ton again to enter multiple log entries.
Use to insert one row at the end of a table.
When enabled on report parameters windows, allows the x- and y-axes
to be scaled automatically. Autoscale means that the x- and y- ranges
will be set to show all the data. If Autoscale is not selected, the entered
range is used.
On report parameters windows, the From / To fields are enabled when
Autoscale options are not selected. Enter the starting and ending val-
ues for the x- and/or y-axes.
Use to enter additional information about the sample, such as a sample
lot number, sample ID, etc.
Searches for a file.
Discards any changes or cancels the current process.
Use to clear the table entries and display only one default value.
Closes the active window and displays a prompt to either accept or
reject changes.
Closes all active windows. If changes were made and not yet saved, a
prompt displays for each changed file providing the option to save the
file.
Enter comments to display in the report header about the sample or
analysis.
Selects the number of copies to print. This field is only enabled when
Print is selected.
When working with tables, deletes the selected information.
Selects the report destination.
Common Fields and Buttons
2 - 3