Micromeritics TRISTAR II PLUS Operator's Manual page 213

Temkin Report (continued)
Selections
Select Reports
[group box]
Specify differential heat
of adsorption
[check box]
Specify monolayer
capacity [check box]
For fields and buttons not listed in this table, see
Buttons on page 2 -
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
Description
Tabular Report. Generates a tabular report of the included samples
that contains the numeric values contributed by each sample.
Temkin Isotherm plot. Overlays the Temkin isotherm with the
analysis data.
Autoscale x-axis. Linear x-axes begin at zero. The x-axis field
n
shows the absolute pressure.
Autoscale y-axis. y-axes begin at zero. The y-axis field shows
n
the quantity of gas adsorbed.
Overlay samples. Use to overlay sample files on the isotherm
n
plot.
Temkin Transform plot. Plots a linear form of the Temkin
transform plot.
Autoscale x-axis. The x-axis field shows the logarithm of pres-
n
sure (ln).
Autoscale y-axis. The y-axis field shows the quantity of gas
n
adsorbed.
Overlay samples. Use to overlay sample files on the transform
n
plot.
Select and enter the differential heat of adsorption at zero surface
coverage. This allows inclusion of all Temkin constants.
Select and enter the monolayer capacity of the sample.
3.
Temkin Report
Common Fields and
8 - 55