Diagnostics; Show All Readings; Start Diagnostic Test - Micromeritics TRISTAR II PLUS Operator's Manual

9 D
IAGNOSTICS
Unit [n] > Diagnostics
Use to display diagnostic readings, start diagnostic tests, and open saved diagnostic reports.
Each test generates a file to the default directory name and path of ...\...\Service\userdiag unless
another directory name was specified. These reports can be sent to a Micromeritics Service
Representative for examination.
S A R
HOW LL EADINGS
Unit [n] > Diagnostics > Show All Readings
The Show All Readings window displays the calibrated readings of all sensors in the system.
S D
TART IAGNOSTIC
Unit [n] > Diagnostics > Start Diagnostic Test
Use to clean and verify gas lines when connecting or changing a gas. See
Gas Line on page 11 - 9
requested by a Micromeritics Service Representative.
This option is typically used and /or requested by a Service Representative. These tests create
and save files to the ...\...\Service\userdiag directory. The Micromeritics Service Representative
may request an emailed or faxed copy of the file for diagnostic purposes.
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
T
EST
for detailed instructions. Also used to perform diagnostic tests

9 Diagnostics

Clean and Verify the
9 - 1