Unit Selection - Micromeritics TRISTAR II PLUS Operator's Manual

2 About the Software
Unit Configuration (continued)
Selections
Gas Selections
[group box]
Options [group box]
Servo Valve
[group box]
Software Versions
[group box]
For fields and buttons not listed in this table, see
Buttons on page 2 -
U S
NIT ELECTION
Options > Units
Use to specify how data should appear on the application windows and reports. This menu option
is not available if using Restricted option presentation in a standard installation environment.
2 - 16
Description
Board ID. Click to display information from the circuit boards in the
analyzer. Use the drop-down list to select a board to view. The
parameters shown cannot be edited.
Enter the gas connected to the specified port.
Displays options installed on the analyzer.
Displays the last calibration date for the servo valve.
Displays the software versions of the MIC BIOS, controller, and ana-
lysis program.
3.
Common Fields and
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023