Micromeritics TRISTAR II PLUS Operator's Manual page 87

Sample Tube (continued)
Selections
Use isothermal jacket
[check box]
Vacuum seal type
[group box]
For fields and buttons not listed in this table, see
Buttons on page 2 -
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
Description
Select if an isothermal jacket is to be used. An isothermal jacket main-
tains a constant temperature profile along the sample tube stem during
an extended analysis of more than 1 or 2 hours.
Select the seal type to be used.
3.
Sample Tube
Common Fields and
4 - 19