Create Sample Files - Micromeritics TRISTAR II PLUS Operator's Manual

3 Sample Files
C S
REATE AMPLE
Options > Option Presentation > Show Degas Conditions
File > New Sample > [.SMP File]
File > Open > [.SMP File]
For 21CFR11 environments, this section is applicable only to members of the
Developer group; however, members of the Analyst group may find information in
this section helpful. Sample file information that is available to Analysts is created by
a member in the Developer group using information in this section.
Each analysis must be linked with a sample file before the analysis can proceed. A sample file can
consist of parameter files; however, parameter files can also stand alone.
Specify or change the option presentation by selecting Options > Option Presentation or use
the view selector drop-down list at the bottom of the window.
Sample files created in the Basic option presentation are selected from parameter files created in
the Advanced option presentation. The values specified in the parameter portions of the default
method are the defaults for new sample files. To navigate from one set of parameters to another,
select the parameter tab across the top of the window.
Sample Tube parameters are edited on the Sample Description tab.
The Degas Conditions tab displays only if enabled in Options > Option
Presentation > Show Degas Conditions
3 - 2
F
ILES
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023