Common Fields And Buttons - Micromeritics ACCUPYC II 1345 Operator's Manual

3 About the Software
C F
OMMON IELDS AND
The fields and buttons in the following table are located in multiple windows throughout the analyzer
application and have the same description or function. Fields and button descriptions not listed in this
table are found in tables in their respective sections.

Common Fields and Buttons

Field or Button
Add
Add Log Entry
Append
Autoscale
Axis Range
Bar Code (default field
label name)
Browse
Cancel
Clear
Close
Close All
Comments
Copies
Delete
Destination
Edit
3 - 2
B
UTTONS
Description
Add an item to the list.
Use to enter information to appear in the sample log report that cannot be
recorded automatically through the application. Click the button again to
enter multiple log entries.
Use to insert one row at the end of a table.
When enabled on report parameters windows, allows the x- and y-axes
to be scaled automatically. Autoscale means that the x- and y- ranges will
be set so that all the data is shown. If Autoscale is not selected, the
entered range is used.
On report parameters windows, the From / To fields are enabled when
Autoscale options are not selected. Enter the starting and ending values
for the x- and/or y-axes.
Enter bar code reader information if a bar code reader is connected to
the computer's USB port. If a bar code reader is not used, this alpha-
numeric field can be used to enter additional information about the
sample, such as a sample lot number, sample ID, etc.
Searches for a file.
Discards any changes or cancels the current process.
Use to clear the table entries and display only one default value.
Closes the active window.
Closes all active windows. If changes were made and not yet saved, a
prompt displays for each changed file providing the option to save the file.
Enter comments about the sample or analysis. Comments display in the
report header.
Select the number of copies to print. This field is only enabled when Print
is selected.
When working with pressure tables and pressures,
selected information.
Select the report destination.
When working with report parameters, highlight the item in the Selected
Delete removes the
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021