Micromeritics TRISTAR II PLUS Operator's Manual page 171

BJH Tabular Report
Highlight BJH Tabular Report in the Selected Reports list box on the BJH Adsorption Report
Options window, then click
BJH Tabular Report
Selections
Collected points
[selection]
Columns [button]
Fixed pore size table
[selection]
Table [button]
For fields and buttons not listed in this table, see
Buttons on page 2 -
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
Edit to specify the method of data reduction.
Description
Use to include all relative pressure points collected. See the
Columns button below.
Select the data types to include in the report. Column [n] indicates
the column order and data contents for the report.
Use to specify exact pore sizes for volume or area data. Click
to modify the fixed pore size table. See the
tons elsewhere in this table.
The fixed pore size table must contain a minimum of two points. The
points must be strictly decreasing. Enabled only when Fixed pore
size table is selected.
3.
BJH Adsorption/Desorption Report
Table and Columns
Common Fields and
Table
but-
8 - 13