Micromeritics TRISTAR II PLUS Operator's Manual page 10

General Safety
S
YMBOLS THAT MAY APPEAR ON THE INSTRUMENT
The following symbols or icons indicate safety precautions and/or supplemental information and
may appear on your instrument:
Use extreme caution when working on the instrument where one of these symbols
may be displayed. These symbols indicate the part may be hot and cause serious
burns.
Use the cotton gloves provided in the accessory kit when handling heated surfaces.
These cotton gloves are not intended to protect hands when heated surfaces are
above 60 °C.
When working on an instrument where this symbol is displayed, refer to the cor-
responding Operator Manual for additional information.
When this symbol is displayed, toxic or flammable gases require proper venting of
exhaust.
This symbol can also indicate the instrument uses mercury which is an extremely
toxic substance. Read the Safety Data Sheet (SDS) and be aware of the hazards of
mercury and know what to do in the event of a spill or an exposure incident.
viii
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023