Methods - Micromeritics TRISTAR II PLUS Operator's Manual

M
ETHODS
Options > Default Method
File > Open > [.MTH File]
For 21CFR11 environments, this section is applicable only to members of the
Developer group; however, members of the Analyst group may find information in this
section helpful. Sample file information that is available to Analysts is created by a
member in the Developer group using information in this section.
A Method determines the default sample identification format and sequence number. A Method is
a template of specifications that go into a newly created sample file. It allows for the definition of
complete sets of parameters for each type of sample commonly analyzed. Only a single selection
is required for each new sample file created.
The Method drop-down list displays only those methods applicable to the open sample file type.
Default Method Examples
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
Developer Group view in a 21CFR environment
Default Method Examples

Methods

2 - 13