Micromeritics TRISTAR II PLUS Operator's Manual page 85

Report Options (continued)
Selections
[check box]
Overlays [button]
Report options
[drop-down box]
Selected Reports
[group box]
Show graphic
[text box]
Show report title
[check box]
For fields and buttons not listed in this table, see
Buttons on page 2 -
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
Description
analyses.
Inside diameter of sample tube. Enabled when Apply thermal
transpiration correction is selected. Enter the inside diameter of the
sample tube used in the analysis.
Refer to the Thermal Transpiration Correction section of the
Calculations document.
See Graph and Sample Overlays on page 7 -
Browse for a .RPO file that contains report options parameters to be
used in the report.
Select the report names to include in the report. For BJH reports, BJH
pore dimension can be calculated in pore width (w), pore radius (R), or
pore diameter (D). Go to Options > Units to specify default
calculations.
Use to show a graphic on the report header.
Height/Width. Enter the height and width of the selected graphic.
These values determine the graphic's appearance on the generated
report.
Select then enter a report title to appear on the report header.
3.
Report Options
27.
Common Fields and
4 - 17