Micromeritics TRISTAR II PLUS Operator's Manual page 8

General Safety
I U
NTENDED SE
The TriStar II Plus is a an automated, three-station, surface area and porosity analyzer that
delivers excellent performance and speed of analysis. With three available analysis ports, the
TriStar II Plus provides high sample throughput and advanced data analysis features to the user.
The TriStar II Plus software gives the user the ability to interactively evaluate isotherm data and
reduce the time required to obtain surface area and porosity results.
The instrument is intended to be operated by trained personnel familiar with the
proper operation of the equipment recommended by the manufacturer and as well as
relevant hazards involved and prevention methods. Other than what is described in
this manual, all use is seen as unintended use and can cause a safety hazard.
The instrument is intended to be used as per applicable local and national regulations.
T
RAINING
It is the customer's responsibility to ensure that all personnel operating or maintaining the
equipment participate in training and instruction sessions. All personnel operating, inspecting,
servicing, or cleaning this instrument must be properly trained in operation and machine safety
before operating this instrument.
vi
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023