General Safety - Micromeritics TRISTAR II PLUS Operator's Manual

G S
ENERAL AFETY
Do not modify this instrument without the authorization of Micromeritics Service Per-
sonnel.
Any piece of laboratory equipment can become dangerous to personnel when improperly
operated or poorly maintained. All employees operating and maintaining Micromeritics
instruments should be familiar with its operation and should be thoroughly trained and instructed
on safety.
Read the operator manual for any special operational instructions for the instrument.
n
Know how the instrument functions and understand the operating processes.
n
Wear the appropriate personal protective equipment when operating this
n
instrument — such as eye protection, lab coat, protective gloves, etc.
When lifting or relocating the instrument, use proper lifting and transporting devices
n
for heavy instruments. Ensure that sufficient personnel are available to assist in
moving the instrument. The TriStar weighs approximately 37 kg (82 lb).
Always pay attention to the safety instructions provided on each label affixed to the
n
instrument and do not alter or remove the labels. When inspecting the instrument,
ensure that the safety labels have not become worn or damaged.
The 3030 TriStar II Plus sound level is below 80 dBA. Hearing protection is
n
optional.
The 3030 TriStar II Plus has a safety shield. Ensure it is in place when operating
n
the instrument.
Proper maintenance is critical to personnel safety and smooth instrument
n
operation and performance. Instruments require regular maintenance to help
promote safety, provide an optimum end test result, and to prevent costly down
time. Failure to practice proper maintenance procedures can lead to unsafe
conditions and shorten the life of the instrument.
If using CO
n
pump and the exhaust is run to a ventilation system or out of the building.
Improper handling, disposing of, or transporting potentially hazardous materials
n
can cause serious bodily harm or damage to the instrument. Always refer to the
SDS when handling hazardous materials. Safe operation and handling of the
instrument, supplies, and accessories are the responsibility of the operator.
The TriStar II Plus is a stand alone instrument. Safe operation and handling of the
instrument, supplies, and accessories is the responsibility of the operator.
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
for analyses, ensure an exhaust line is connected to the vacuum
2

General Safety

v