Software Uninstall; Software Updates - Micromeritics TRISTAR II PLUS Operator's Manual

S U
OFTWARE NINSTALL
Uninstall Software in 21CFR11 Environments on page 2 - 30
The software can be uninstalled in two ways. Either method removes only the files required to run
the software, not the analysis files.
Click the Windows Start icon. Scroll to the Micromeritics entry. Select the Uninstall [analyzer]
n
option, then follow the prompts.
Locate the uninstall.exe file in C:\Program Files (x86)\Micromeritics\[analyzer name] (or
n
wherever the application was installed). Double-click the uninstall.exe file, then follow the
screen prompts.
S U
OFTWARE PDATES
A User Account Control in the Windows operating system must be enabled to ensure
all components of the Micromeritics application are correctly installed. If UAC is not
enabled, right-click the setup.exe installer file and select Run as administrator.
The most current version of the instrument software can be found on the Micromeritics web page
(www.micromeritics.com).
When performing a software update, existing data files are not overwritten.
Insert the setup media into the media drive. The setup program starts automatically. If the
program does not start automatically, navigate to the installation media drive, locate and double-
click the setup.exe file.
Existing Confirm application users and groups are not affected by software updates.
Any changes to Confirm users and Confirm groups must be made using Windows
Users and Groups.
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023

Software Uninstall

2 - 25