Micromeritics TRISTAR II PLUS Operator's Manual page 202

8 Selected Report Options
To make a successful Advanced calculation, a second sample file must be selected
using the Select
to the two sample file names to select the isotherm data points for each sample. After
selecting an option, the blue bars in the isotherm graph will be toggled to select either
the red points or the green points. Once these selections have been done, the results
will appear in the left-hand plots and a second isotherm will appear in the isotherm
plot (lower right) as well as a second curve-fit. As the selection of points is adjusted,
the DFT editor will recalculate the PSD results and also recalculate the two model
curve fits.
NLDFT Advanced PSD Report
Selections
Geometry
[drop-down box]
Model [drop-down box]
Regularization
[drop-down box]
Select Reports
[group box]
For fields and buttons not listed in this table, see
Buttons on page 2 -
8 - 44
button. A second model must also be selected. Use the options next
Description
Select the pore shape.
Lists the models that meet the specified criteria and match the
adsorbate and temperature of the sample data. If no models appear,
no models meet the selected criteria. One model must be selected.
Select the extent of smoothing to apply to the data. If 0.20000 (user)
is selected, enter a number in the text box giving a relative weight for
the smoothing during deconvolution. Larger values produce more
smoothing.
Use to select the second sample file.
3.
Common Fields and
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023