Unit Configuration; Diagnostics - Micromeritics DVVA II 4000 Operator's Manual

Unit Configuration

Unit Configuration
Select this option to display software/hardware configurations for the selected analyzer. When
you select Unit > Unit Configuration, the Unit Configuration dialog is displayed.
Software Versions
Cylinder run-count
Upper Tip Run-count
Lower Tip Run-count
Reset
Calibration

Diagnostics

This command is used by Micromeritics service personnel.
6-16
Displays the software versions for components being
used by the analyzer, and the serial number of the
analyzer.
Displays the number of piston cycles for the analyzer
Displays the number of cycles for the upper and lower
pistons.
Enables you to reset the Tip run-count fields to zero
after the piston tip is replaced.
Shows the date and time for current instrument
calibrations.
DVVA II 4000
400-42803-01 (Rev B) - July 2017