MX61/MX49
■
PROGRAM INSTALLATION PROCEDURE
[Caution !]
•
Check to ensure that the USB memory is connected in the correct direction.
(Incorrect connection will cause damage to the USB [TO DEVICE] terminal.)
•
Don't turn off the power during installation.
•
Don't remove the USB memory during installation.
1. Connect the USB memory including the data for rewriting (MX4961SETUP.PRG) to the
USB [ TO DEVICE] terminal of the instrument.
2. While pressing [
Keep pressing until the following message is displayed.
*
The version displayed here varies depending on the program in the instrument, i.e., it is not always "1.00".
3. The installer is being read .
*
If "Please insert the media." is displayed, no USB memory has been inserted or the USB memory cannot be recognized.
Insert the USB memory properly, and the procedure advances.
48
<Rear side>
] (Play/Pause) button, turn on the [ ] (Standby/On) switch.
<Rear side>
[
] (Standby/On) switch
<Front side>
USB memory
[
] (Play/Pause) button