Sinexcel SVG 100 Ultra User Manual page 90

Note: Some PC has no option to format the U disk into'FAT32', please download the software (for example:
DiskGenius) and use the software to format it to'FAT32'.
Step 2：
Find the firmware ZIP file provided by Sinexcel (different HMI has different software version), the
firmware folder includes two packages'DWIN_SET', 'monitor.tar.gz'. ('DWIN_SET' is to upgrade monitor
screen interface, 'monitor.tar.gz' is used to upgrade the monitor board, as shown in below Figure).
Note:'DWIN_SET' is a folder package, please copy the whole folder'DWIN_SET' to the root menu of SD card,
do not change the folder name'DWIN_SET'.
'monitor.tar.gz' is a zip file, do not unzip it, please copy The 'monitor.tar.gz' to the root menu of USB disk
directly.
If using SD card and card reader, please copy both file into the root menu of SD card.
Figure A- 14 Zip
Step 3：
Please energize the 7-inch HMI, then insert the SD Card into the interface of 7-inch HMI.
Figure A- 15 Inserting Figure A- 16 Inserted
33