Sinexcel SVG 100 Ultra User Manual page 54

Click 'Debugging' option in the data menu that can be real-time see the data of Analog Address.
Debugging
Click 'Version' option in the data menu that can be real-time see the data of Software Version, System Model
and Expiry Days.
Version
Click 'CT Check' in the data menu that can check the CT wiring well or not.
CT Check
The 'Addr. 1/2/3/4/5/6' that is used in when the
module has some alarms, and need to enter
correspond address to check the module operation
whether right or not.
The 'Pos./Neg. bus vol.' are used to see the value
of voltage on different bus.
The 'Controller Para. P/Q/R' are used for Sinexcel
inter factory test.
The 'Software Version''M' means the version of
monitor, 'D' means the version of U1 board, 'K' and'T
207' used for R&D of Sinexcel.
The 'System Model' refers to the information of the
module, includes the type, capacity, wiring and etc.
of the module.
The 'Expiry Days' refers to the expiry days of the
module
Sinexcel's CT check function is designed to improve
the efficiency and convenience of CT installations for
customers. CT (current transformer) is an important
component in power systems that measures the
current flowing through a circuit. However, incorrect
installation or malfunctioning of CT can result in
inaccurate measurements and potential safety
hazards.
54