Sinexcel SVG 100 Ultra User Manual page 27

ATTENTION
The ambient temperature at the time of installation must be -10℃
~40℃.
ATTENTION
Ensure that there is no dust (can be conductive) or corrosive/explosive
gases in the installation environment.
ATTENTION
The SVG MUST NOT be installed in an environment with strong
magnetic fields, nuclear radiation or high-power RF noise.
ATTENTION
The relative humidity in the environment should be lower than 95%.
The presence of steam or condensation may result in permanent
damage to the device or endanger personal safety.
ATTENTION
The installation altitude should be lower than 1500m. If it is over
1500m, the equipment must be de-rated 1% per 100m increase in
altitude.
ATTENTION
Avoid severe physical shock, violent impact and large angle tilting in
the installation process as this may cause damage and operational
failure of the unit.
ATTENTION
During installation, leave sufficient operating space for cooling,
maintenance and operation.
27