Hpe Smartmemory Speed Information; Dimm Handling Guidelines; Dimm Installation Guidelines - HPE ProLiant MicroServer Gen10 Series Troubleshooting Manual

HPE SmartMemory speed information

For more information about memory speed information, see the Hewlett Packard Enterprise website (https://
www.hpe.com/docs/memory-speed-table).

DIMM handling guidelines

When handling a DIMM, observe the following guidelines:
• Avoid electrostatic discharge.
• Always hold DIMMs by the side edges only.
• Avoid touching the connectors on the bottom of the DIMM.
• Never wrap your fingers around a DIMM.
• Avoid touching the components on the sides of the DIMM.
• Never bend or flex the DIMM.
CAUTION:
Failure to properly handle DIMMs can cause damage to the components on the DIMM, as well as the
system board connector.

DIMM installation guidelines

When installing a DIMM, observe the following guidelines:
• Before seating the DIMM, open the DIMM slot and align the DIMM with the slot.
• To align and seat the DIMM, use two fingers to hold the DIMM along the side edges.
• To seat the DIMM, use two fingers to apply gentle pressure along the top of the DIMM.
For more information, see the Hewlett Packard Enterprise website.
26 HPE SmartMemory speed information