Internal Peripheral Device Connections; Peripheral Device Cables; Ata Flat Cable Connection; Table 5-3: Iei Provided Cables - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card

5.7 Internal Peripheral Device Connections

5.7.1 Peripheral Device Cables

The cables listed in Table 5-3 are shipped with the SPCIE-3600AM2.
Quantity Type
1 ATA 66/100 flat cable
1 Dual RS-232 cable
6 SATA drive cables
3 SATA drive power cables
1 USB cable

Table 5-3: IEI Provided Cables

Separately purchased optional IEI items that can be installed are listed below:
Audio kit
Keyboard and mouse cable with bracket
For more details about the items listed above, please refer to Chapter 3. Installation
instructions of the accessories listed above are described in detail below.

5.7.2 ATA Flat Cable Connection

The ATA 66/100 flat cable connects to the SPCIE-3600AM2 to one or two IDE devices. To
connect an IDE HDD to the SPCIE-3600AM2 please follow the instructions below.
Step 2: Locate the IDE connector. The location/s of the IDE device connector/s is/are
shown in Chapter 3.
Step 3: Insert the connector. Connect the IDE cable connector to the on-board
connector. See Figure 5-6. A key on the front of the cable connector ensures it
can only be inserted in one direction.
Page 79