Table of Contents
Advertisement
Step 6:
Close the CPU socket. Re-engage the load lever by pushing it back to its
original position. Secure the load lever under the retention tab on the side of
CPU socket.
5.4.2 Socket AM2 Cooling Kit Installation
CF-AM2-RS
Figure 5-2: IEI Cooling Kit
An IEI AMD Socket AM2 CPU cooling kit (Figure 5-2) can be purchased separately. The
cooling kit comprises a CPU heat sink and a cooling fan. To install the cooling kit, please
follow the steps below.
Step 1:
Spread a proper amount of thermal paste onto the bottom of the cooling fan heat
sink. The thermal paste between the CPU and the heat sink is important for
optimum heat dissipation.
Step 2:
Properly orient the cooling kit. Be sure the cooling kit is properly oriented before
installing the cooling kit into the preinstalled cooling kit bracket.
Step 3:
Install the cooling kit into the preinstalled cooling kit bracket. See Figure 5-3.
Step 4:
Attach the levered mounting clips. Slip the four levered mounting clips into the
clip holes on the cooling kit bracket. See Figure 5-3.
Step 5:
Secure the cooling kit in place. Gently push the plastic mounting clip down to
lock the cooling kit. See Figure 5-3.
Page 72
SPCIE-3600AM2 PICMG 1.3 CPU Card
Step 0:
CF-519-RS
Advertisement
Table of Contents
