Table of Contents
Advertisement
Figure 5-14: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable
RJ-45 connector into the on-board RJ-45 connector.
5.8.2 USB Device Connection (Single Connector)
There are two external USB 2.0 connectors. Both connectors are perpendicular to the
SPCIE-3600AM2. To connect a USB 2.0 or USB 1.1 device, please follow the instructions
below.
Step 1:
Located the USB connectors. The locations of the USB connectors are shown in
Chapter 4.
Step 2:
Align the connectors. Align the USB device connector with one of the connectors
on the SPCIE-3600AM2. See Figure 5-15.
Page 88
SPCIE-3600AM2 PICMG 1.3 CPU Card
Step 0:
Advertisement
Table of Contents
