Chassis Installation; Airflow; Motherboard Installation; Internal Peripheral Device Connections - IEI Technology KINO-PVN-D5251 User Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC

4.7 Chassis Installation

4.7.1 Airflow

WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the KINO-PVN-D5251/D4251 must
have air vents to allow cool air to move into the system and hot air to
move out.
The KINO-PVN-D5251/D4251 must be installed in a chassis with ventilation holes on the
sides allowing airflow to travel through the heat sink surface. In a system with an individual
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.

4.7.2 Motherboard Installation

To install the KINO-PVN-D5251/D4251 motherboard into the chassis please refer to the
reference material that came with the chassis.

4.8 Internal Peripheral Device Connections

This section outlines the installation of peripheral devices to the onboard connectors

4.8.1 AT/ATX Power Connection

Follow the instructions below to connect the KINO-PVN-D5251/D4251 to an AT or ATX
power supply.
WARNING:
Disconnect the power supply power cord from its AC power source to
prevent a sudden power surge to the KINO-PVN-D5251/D4251.
Page 47