Table of Contents
Advertisement
SPCIE-3600AM2 PICMG 1.3 CPU Card
Figure 5-9: PS/2 Connector
5.7.5 Dual RS-232 Cable Connection
The dual RS-232 cable consists of two connectors attached to two independent cables.
Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket.
To install the dual RS-232 cable, please follow the steps below.
Step 1:
Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2:
Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 5-10. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.
Page 83
Advertisement
Table of Contents
