Vga Monitor Connection; Figure 5-15: Usb Device Connection - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card

Figure 5-15: USB Device Connection

Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.

5.8.3 VGA Monitor Connection

The SPCIE-3600AM2 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the SPCIE-3600AM2, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15 connector
is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
SPCIE-3600AM2. See Figure 5-16.
Step 0:
Page 89